Oregon Coots Water Access

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======= Toledo Ramp (Yaquina River) =======

=== WORK IN PROGRESS ===

This ramp is about 2-miles down the Yaquina River from the town of Toledo Oregon, next to the airport.

**Picture of Access Point**

Picture is coming

**Location**

GPS Location 44.xxxx, -123.xxxx   Put the access lat-lon here. Try to get at least 4 digits for the GPS (5 is better, 6 is overkill)   

[[https://umap.openstreetmap.de/en/map/coots-map_138835#12#12/44.xxxx/-123.xxxx|44.xxxx,-123.xxxx]]

If possible, an image of a map showing the access point and associated park or the like goes here.  One of the best sources, that is open to use, is [[https://www.openstreetmaps.org|Open Street Maps]].  If you crop the map image, be sure you leave the credit that appears at the bottom.  Again, try to keep the map image to around 640 pixels.

Also, include driving instructions here, if needed.  If a turn-off is hard to locate, a few words could be valuable.  Any special instructions such as freeway exit numbers can go here.

**Description**
Tell us about the access site, and anything about the launch ramp.   Is it steep or shallow?  Slime at the bottom, perhaps?  A very important element is the depth of the ramp.  Most of  our water varies in depth and some ramps do not work for the lower levels.  

**Water Character**
This can't cover everything.  But, if the lake is drained in the winter, put it here.  Is there a big stump at low water?  Maybe, the weeds grow in to the access area in summer?  That sort of information directly affects the decision to use the access point.


-------------------------------------------------------------------------------------------
Put into *edit mode* and you'll see the underlying markup for this fake site.   Then just copy the markup and everything above this line and you'll have a rough template for a new site.    You are just using edit mode to get at the underlying markup, so please don't accidentally save the template!   Then just paste the markup into your new site and put in the correct data.