Index of /Misc/Michalak/Photos/Jewelbox Jr

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[IMG]3-D clamped_996306906.jpg2019-11-01 17:36 50K 
[IMG]3D Temporarily screwed_730911668.jpg2019-11-01 17:36 42K 
[IMG]49 cents a foot chine close_767166977.jpg2019-11-01 17:36 43K 
[IMG]Additional interior primer_935906431.jpg2019-11-01 17:36 45K 
[IMG]Aft bottom glued and nailed_870424389.jpg2019-11-01 17:36 48K 
[IMG]Aft bottom ply clamped_435264833.jpg2019-11-01 17:36 35K 
[IMG]After 60 grit_732912053.jpg2019-11-01 17:36 33K 
[IMG]After interior primer_1730288569.jpg2019-11-01 17:36 35K 
[IMG]After primer_1550721105.jpg2019-11-01 17:36 31K 
[IMG]Anchorwell from below_1409805187.jpg2019-11-01 17:36 44K 
[IMG]Anchorwell primered_2087410398.jpg2019-11-01 17:36 36K 
[IMG]Anchorwell rough from above_2071987800.jpg2019-11-01 17:36 40K 
[IMG]Anchorwell rough trimmed_1182999300.jpg2019-11-01 17:36 41K 
[IMG]Before interior primer_650958742.jpg2019-11-01 17:36 38K 
[IMG]Begining main bulkheads_1745223696.jpg2019-11-01 17:36 38K 
[IMG]Bottom ply was test bent_1944044843.jpg2019-11-01 17:36 45K 
[IMG]Bottom prep_2023520860.jpg2019-11-01 17:36 38K 
[IMG]Bottom scarf wet out_2076546350.jpg2019-11-01 17:36 42K 
[IMG]Bottom thickness closeup_294854367.jpg2019-11-01 17:36 40K 
[IMG]Bulkhead fillet and limberhole_1960718526.jpg2019-11-01 17:36 31K 
[IMG]Bulkheads_362765926.jpg2019-11-01 17:36 36K 
[IMG]Bulkhead to topside fillet_297898359.jpg2019-11-01 17:36 46K 
[IMG]Cabintop beams_1369933914.jpg2019-11-01 17:36 42K 
[IMG]Cabintop glued and nailed_355121251.jpg2019-11-01 17:36 50K 
[IMG]Cabintop panels rough fit_1137672986.jpg2019-11-01 17:36 46K 
[IMG]Corner covered_671069353.jpg2019-11-01 17:36 29K 
[IMG]Cured peelply scarf sanded_1429496482.jpg2019-11-01 17:36 45K 
[IMG]Doug fir for chine_172041728.jpg2019-11-01 17:36 44K 
[IMG]Doulbed rubrail_278723978.jpg2019-11-01 17:36 42K 
[IMG]Drainhole_975356812.jpg2019-11-01 17:36 39K 
[IMG]Dumping epoxy_828435616.jpg2019-11-01 17:36 36K 
[IMG]Epoxy coated xynole_1348375982.jpg2019-11-01 17:36 57K 
[IMG]Epoxy nytex microballons butt_673345947.jpg2019-11-01 17:36 36K 
[IMG]Fillet close_272106794.jpg2019-11-01 17:36 26K 
[IMG]First course rubrail_367495141.jpg2019-11-01 17:36 45K 
[IMG]First frame and sides_1830253914.jpg2019-11-01 17:36 53K 
[IMG]First rubrail glued and nailed_459314487.jpg2019-11-01 17:36 36K 
[IMG]Flipping 2_1354375076.jpg2019-11-01 17:36 43K 
[IMG]Flipping_1966532286.jpg2019-11-01 17:36 43K 
[IMG]Forward panel glued and nailed_1888262769.jpg2019-11-01 17:36 30K 
[IMG]Frames 1_1578421775.jpg2019-11-01 17:36 49K 
[IMG]Glued and nailed_1654830033.jpg2019-11-01 17:36 44K 
[IMG]Gluing buttblocks_1639566285.jpg2019-11-01 17:36 43K 
[IMG]Graphite added_632602442.jpg2019-11-01 17:36 35K 
[IMG]Graphite lightly sanded_1311896647.jpg2019-11-01 17:36 34K 
[IMG]Graphite shine_1717274213.jpg2019-11-01 17:36 37K 
[IMG]Green tinted topsides primer_1225613525.jpg2019-11-01 17:36 46K 
[IMG]Knee_542344845.jpg2019-11-01 17:36 38K 
[IMG]Layer 2 in place_299855117.jpg2019-11-01 17:36 40K 
[IMG]Leeboard trial fit_358988614.jpg2019-11-01 17:36 44K 
[IMG]Limberhole_335017496.jpg2019-11-01 17:36 33K 
[IMG]Main bulkhead rough_809259827.jpg2019-11-01 17:36 42K 
[IMG]Main bulkhead trimmed_167097817.jpg2019-11-01 17:36 37K 
[IMG]Mast partner_501879424.jpg2019-11-01 17:36 29K 
[IMG]More photos_1545357931.jpg2019-11-01 17:36 10K 
[IMG]Now the bottom_730270896.jpg2019-11-01 17:36 43K 
[IMG]On her side_9488150.jpg2019-11-01 17:36 39K 
[IMG]On side interior_763211527.jpg2019-11-01 17:36 47K 
[IMG]On the cabintop_1475093861.jpg2019-11-01 17:36 40K 
[IMG]Peel ply over scarf_1489065340.jpg2019-11-01 17:36 28K 
[IMG]Pointy Skiff pieces on JB Jr_859647783.jpg2019-11-01 17:36 43K 
[IMG]Port chine clamped_2087904226.jpg2019-11-01 17:36 47K 
[IMG]Port chine close_1754806945.jpg2019-11-01 17:36 39K 
[IMG]Preprimed bulkhead clamped_1506378094.jpg2019-11-01 17:36 46K 
[IMG]Primer on scarf_1467229499.jpg2019-11-01 17:36 39K 
[IMG]Ready for bottom ply_471111879.jpg2019-11-01 17:36 45K 
[IMG]Rubrail clamped_1018641886.jpg2019-11-01 17:36 44K 
[IMG]Scarfed chines_1302402615.jpg2019-11-01 17:36 40K 
[IMG]Scarf finished_559135150.jpg2019-11-01 17:36 40K 
[IMG]Second layer glued and clamped_1968131178.jpg2019-11-01 17:36 41K 
[IMG]Second layer nailed_1762257670.jpg2019-11-01 17:36 46K 
[IMG]Splice after peelply removed_692126804.jpg2019-11-01 17:36 38K 
[IMG]Spreading epoxy_1507091114.jpg2019-11-01 17:37 31K 
[IMG]Test bend_577903761.jpg2019-11-01 17:37 44K 
[IMG]Tinted primer close_1808829925.jpg2019-11-01 17:37 40K 
[IMG]Topsides_558748575.jpg2019-11-01 17:37 47K 
[IMG]Two more frames_853985456.jpg2019-11-01 17:37 48K 
[IMG]Upright at last_1900748291.jpg2019-11-01 17:37 44K 
[IMG]Upright interior from bow_1269136698.jpg2019-11-01 17:37 39K 
[IMG]Windows all cut_848859727.jpg2019-11-01 17:37 42K 
[IMG]Windows first one cut_1215070877.jpg2019-11-01 17:37 43K 
[IMG]Windows view out_1929016887.jpg2019-11-01 17:37 45K 
[IMG]Windows view thru all_860061540.jpg2019-11-01 17:37 37K 
[IMG]Xynole closeup_1928456258.jpg2019-11-01 17:37 52K 
[IMG]Xynole for bottom sheathing_1882500604.jpg2019-11-01 17:37 35K 
[IMG]Xynole over corner_196401631.jpg2019-11-01 17:37 32K 
[IMG]Xynole weave_999987076.jpg2019-11-01 17:37 59K