Note:

Re "mods 2" there is an extra piece of timber behind the motor pad 
(Same thickness),under the motor well.
This will hopefully stop the vibration and drumming that was happening there.
If anyone wants to build Campjon then I recommend you DON'T use 1/4 ply
for the motor well floor.


The bench seat is a great improvement on using folding chairs.
You can't stow anything under a folding chair, well, not for long.

The ply gussets should really go from the top of the transom to the
 top of the next bulkhead, mine fell short because I couldn't remove 
the light fitting. I shouldn't have used polyurethane adhesive to bond it.
 

The stainless sheet is because I am sick of gnawing up the transom with 
various motor swaps.The stainless can be gnawed instead.